logo

Report on Competency Demonstrations

   

Added on  2020-04-21

8 Pages1614 Words94 Views
COMPETENCYDEMONSTRATION REPORTCareer Episode 1SHRUTI S.BHAVTHANKAR
Report on Competency Demonstrations_1
CE 1.1 Project InformationName of the project: Design and Development of Domestic Refrigeration UnitLocation of the project: [PLEASE FILL]Project Duration: [PLEASE FILL]Organization: [PLEASE FILL]Role and Designation during the time: Team MemberCE 1.2 Project BackgroundCE 1.2.1 Characteristics of the projectA refrigerator can be defined as a cooling appliance which is mainly comprised of athermally insulated compartment and a process mechanism used for the transferring of completeamount of heat from the inside of the apparatus to the outside environment. This process coolsdown the internal components to a temperature below an ambient limit. The use of a refrigeratorsis for the storage of foods to stop them from deteriorating from the growth of bacterial growth. Thedesigning of the modern refrigerators are based on the basic laws of physics. The two laws used are:heat flows from a warmer region to a cooler region and with the decrease of the pressure of a gas thetemperature decreases proportionately. All the components are connected to form a fluid currentflow: a condenser, a compressor, an evaporator and an expansion valve. The main problem with themodern refrigerators is that they are large in size. Transferring of medicines to some remote location,going out for picnics and for fishing trips requires a small transportation refrigerators.
Report on Competency Demonstrations_2
CE 1.2.2 Objectives developed for the projectFor the completion of this project I had set out the following list of objectives to befollowed:To develop a small portable refrigerator. To develop the refrigerator to run on DC. To make it compatible for the storage of food as well as medicines. To understand the concept to be followed for the development of a refrigerator. To fabricate a prototype of the refrigerator based on the understanding of the researchand the engineering drawing done. To make the refrigerator to be compatible with any kind of backup power supply.CE 1.2.3 My area of workI was responsible for looking after the production process of the refrigerator. I hadplanned and coordinated the daily process and target for the delivery of the best quality products.I had identified any kind of unsafe measures of usage of the materials for the productionprocedure so that there are no problem with the final product. I had also applied my knowledgeof the cost reduction methodology so as to make the project as cheap as possible to be affordablefor everyone. I had analysed all the problems that were being faced during the process ofimplementation of the project and found out the best solution to be applied for the project. I hadalso looked after the budget prepared at the start of the project along with the expenses that werebeing incurred by us for the project.
Report on Competency Demonstrations_3

End of preview

Want to access all the pages? Upload your documents or become a member.

Related Documents
Competency Demonstration Report Humidity Control
|8
|1624
|83

Report on Wireless Temperature Sensor Using Bluetooth
|8
|1661
|63

Shell and Tube Exchanger Construction Assignment
|12
|1792
|118

Designing, Analysis and Development of HVAC System Project
|9
|1751
|389

Design and Fabrication of Temperature Controller System Project
|9
|1691
|54

Project on Intelligent Braking System
|8
|1623
|135