logo

Design and Fabrication of Grinding Attachment (Doc)

7 Pages1656 Words109 Views
   

Added on  2020-04-21

Design and Fabrication of Grinding Attachment (Doc)

   Added on 2020-04-21

ShareRelated Documents
CE 3.1 Project InformationName of the project: Design and Fabrication of Grinding AttachmentLocation of the project: Please fillProject Duration: Please fillOrganization: Please fillRole and Designation during the time: Team Member of the projectCE 3.2 Project BackgroundCE 3.2.1 Characteristics of the projectGrinding operation is performed for obtaining an excellent surface finish after performingthe turning operation on a specific lathe machine for any type of cylindrical jobs. This is done forobtaining the required dimensions of the portion that is to be utilized in any particular assembly.Therefore, for performing these two specific operations on the same perfect machine the grindingattachment is designed. Fabrication of this grinding attachment is done for verification. Thisproject describes about an attempt for decreasing the overall time in the loading and theunloading of a particular work piece with desired surface finish. This project provides adescription about the selection of wheel for the purpose of grinding. The project of grindingattachment even considers the inflexibility of the design, damping of trembling due to the speedof the motor and stress analysis of the critical part of the design. This design is analyzed on theinventor software and compared with all types of theoretical calculations.
Design and Fabrication of Grinding Attachment (Doc)_1
CE 3.2.2 Objectives developed for the projectThe design and fabrication of project of Design and Fabrication of Grinding Attachmenthas some of the major and significant objectives. The objectives developed for this particularproject are as follows:To design and fabricate a Grinding Attachment of lathe machine.To perform several operations To grind small jobs.To help the small and medium enterprises.CE 3.2.3 My area of workI was a member of the project team of grinding attachment of lathe machine. I made surethat the project was successful. I had worked under the supervision of my team leader and headof the department. My team leader distributed the entire work amongst us equally. At first, I hadfew doubts for the project. However, under the supervision of the head of the department andteam leader, all my doubts were cleared and I understood the entire project perfectly. Thisproject helped me to understand the concept of grinding attachment and lathe machinecompletely and easily. I have utilized my mechanical engineering skills and knowledge for thesuccessful completion of the project.
Design and Fabrication of Grinding Attachment (Doc)_2
CE 3.2.4 Project GroupHead of DepartmentProject Leader Team MemberTeam MemberTeam MemberMEFigure 1: Team Members Associated with the projectCE 3.2.5 My responsibilities throughout the projectI had undertaken significant research on the project study. I had implemented the projectdesign and fabrication of the grinding attachment of lathe machine. Then, I had checked theprocesses that are needed for this particular project work. I had customized, tested, assessed aswell as again tested these particular products. My major responsibility was the writing part of theproject reports and also documenting the most important data into the report. I had eveninterpreted and analyzed the project data for designing and fabricating of the main project. Myinvolvement in the project was from designing until the completion of the work. I made sure thatthe project study was done perfectly.
Design and Fabrication of Grinding Attachment (Doc)_3

End of preview

Want to access all the pages? Upload your documents or become a member.

Related Documents
Design and Analysis of Grinding Attachment Project at Pune University
|7
|1712
|363

Design of Grinding Wheel Attachments on Lathe Machine - Project Information, Background, Objectives, and Accomplishments
|8
|1747
|72

Design and Fabrication of Drilling Machine Assignment
|7
|1690
|136

Design and Fabrication of Grinding Attachment for Lathe Machine Tool
|6
|2205
|382

Design of Power Generator with Pedal Operation - PDF
|7
|1660
|77

Design and Fabrication of PV Solar Rooftop Power Generation System
|7
|1687
|25