Network Requirement Analysis and Plan for HiTech Telecommunication

This report provides a detailed network requirement analysis and plan for HiTech Telecommunication, including project scope, requirement, design strategy, topology diagram, hardware requirements, and device configurations.

Running head: INTERNETWORKING TECHNOLOGIES
Assignment 2
Network requirement analysis and plan
Name of the Student
Name of the University
Author’s Note

1
INTERNETWORKING TECHNOLOGIES
Table of Contents
Section 1 - Project Report......................................................................................................................2
Project Scope.....................................................................................................................................2
Project requirement..........................................................................................................................2
Network Design Strategy...................................................................................................................2
Network Topology Diagram...............................................................................................................3
Section 2 - Project Hardware Requirements..........................................................................................4
Section 3 - Detailed Network Design in Netsim....................................................................................6
Section 4 - Network Device Configurations...........................................................................................6
Bibliography.........................................................................................................................................13

2
INTERNETWORKING TECHNOLOGIES
Section 1 - Project Report
Project Scope
The main scope identified for the development of the network solution for the HiTEch
Telecommunication is to connect the four branches of the organization located in different
geographical location. A central server should be used for storing the different files of the
organization and it should be protected from the access of the unauthorised users. The protection of
the server is the main criteria and the servers should be configured with the web server and the
printing management for increasing the efficiency of the network and creating an IP addressing plan
for the employees connected in the network. The router is configured with IP route such that the
employees connected in different vlan is able to communicate with each other. The wireless router
is used for each of the vlan and the vlan are named according to the department and reducing the
complexity of the network and making the management process easy.
Project requirement
The main requirement identified for the development of the project is listed below:
- Identification of the project hardware and the cost for the deployment of the network
device in different location of the network should be identified for the development of the
network solution.
- A design of the network should be created for connecting the four branches of the HiTech
Telecommunication and increasing the efficiency of the current business process of the
organization.
- Different vlans should be created for the different department and the server network such
that the security of the network is maintained and the efficiency of the network is increased.
- The different activity of the user should be recorded and the flow of data traffic in the
network should be monitored for the development of the project and securing the network
- The wireless access point installed in different location of each of the department should be
configured with encryption algorithm such that it should not be accessed by any illegal users
for intruding into the network.
Network Design Strategy
For the development of the network design the number of routers and switches required and the
number of user using the network should be identified. The network designer is responsible to
create a network topology and the selection for the network topology is important for successfully
designing a network solution.

3
INTERNETWORKING TECHNOLOGIES
Network Topology Diagram
- Switch Configuration (VLAN, Trunking)
- Router Configuration (VLAN sub interface, Access lists)
- DHCP Configuration

4
INTERNETWORKING TECHNOLOGIES
- Access Point, Server configuration guidelines
The access point should be configured with the encryption for the access point for the
development of the network solution. The guidelines should be followed for the installation and
configuration of the access point and allowing the users to connect their wireless devices with
the organizational network.
Section 2 - Project Hardware Requirements
a.
Name of the network
device
Series Model Ports
Cisco 2811 Integrated
Services Router - Cisco
2811 series Integrated service
router
2 Serial Port and 2
Fast Ethernet Ports
Cisco Catalyst 2960
Series Switches - Cisco
2960 series Catalyst series switch 12 Fast Ethernet LAN
ports
b. Types of cables
Category Capacity Usage
Cat 5 Ethernet and Fast Ethernet LAN
Cat 5e Ethernet, Fast Ethernet and
Gigabit Ethernet
LAN
Cat 6 Ethernet, Fast Ethernet and
Gigabit Ethernet
Data centre, cat 6 certified
devices, LAN
c. Name of the server, PC
File Server
Memory -4 Gb
HDD – 1Tb

5
INTERNETWORKING TECHNOLOGIES
Operating system – Windows Server 2012
Processor – Intel® Core™ i7-8559U Processor
Print Server
Memory - 4 Gb
HDD – 1Tb
Operating system – Windows Server 2012
Processor – Intel® Core™ i7-8709G Processor
WEB Server
Memory - 4 Gb
HDD – 1Tb
Operating system – Windows Server 2012
Processor – Intel® Core™ i7-8750H Processor
DHCP Server
Memory - 4 Gb
HDD – 1Tb
Operating system – Windows Server 2012
Processor – Intel® Core™ i7-8559U Processor

6
INTERNETWORKING TECHNOLOGIES
Section 3 - Detailed Network Design in Netsim
Justification of the network designed
For the development of the network solution four cisco 2811 series router is selected and all the
four branches are connected with the head quarter using the serial cable. A switch is connected with
each of the branch and the headquarter for the management of the distribution and connecting the
PCs with network. Vlans are configured on the switches and the switch IP address is allocated for
connecting the Pcs with the network and enabling communicating with each other.
Section 4 - Network Device Configurations
a. Switch Configuration:
- Setting IP address on PC and Switch
- Create VLAN

7
INTERNETWORKING TECHNOLOGIES
- Ping each other
- Setting VTP domain with the first name
- Setting VTP password with the family name
- Demonstration of VTP packets

8
INTERNETWORKING TECHNOLOGIES
b. Router Configuration:
- Setting description on interfaces
- Displaying information about directly connected devices to the router
- Setup IP address for each interface

9
INTERNETWORKING TECHNOLOGIES

10
INTERNETWORKING TECHNOLOGIES
- Subnet mask information

11
INTERNETWORKING TECHNOLOGIES
- Ping all routers

12
INTERNETWORKING TECHNOLOGIES

13
INTERNETWORKING TECHNOLOGIES
Bibliography
[1.] Ferdoush, Sheikh, and Xinrong Li. "Wireless sensor network system design using Raspberry Pi
and Arduino for environmental monitoring applications." Procedia Computer Science 34 (2014):
103-110.
[2.] Guo, Bingli, Chunming Qiao, Jianping Wang, Hongfang Yu, Yongxia Zuo, Juhao Li, Zhangyuan
Chen, and Yongqi He. "Survivable virtual network design and embedding to survive a facility
node failure." Journal of Lightwave Technology 32, no. 3 (2014): 483-493.
[3.] McDonald, John C., ed. Fundamentals of digital switching. Springer Science & Business Media,
2013.
[4.] Simmons, Jane M. Optical network design and planning. Springer, 2014.
[5.] Tree, Star. "Wireless sensor networks." Self 1, no. R2 (2014): C0.
[6.] Wang, David ZW, Haoxiang Liu, and W. Y. Szeto. "A novel discrete network design problem
formulation and its global optimization solution algorithm." Transportation Research Part E:
Logistics and Transportation Review 79 (2015): 213-230.