Competency Demonstration Report for Implementation of RFID Based Security and Access Control System

COMPETENCY DEMONSTRATION REPORT
Career Episode 1
KATUDIA VEENAY KISHOR MEENA

CE 1.1 Project Information
Name of the project: Implementation of RFID Based Security and Access Control
System
Location of the project: [PLEASE FILL]
Project Duration: [PLEASE FILL]
Organization: [PLEASE FILL]
Role and Designation during the time: Team Leader
CE 1.2 Project Background
CE 1.2.1 Characteristics of the project
I have developed the design of the Security and access control system through utilizing
biometrics and RFID technology in a manner to enhance the security system. I had implemented
the RFID in a manner to read the user whenever he or she reaches the door, capture an image,
and will allow the individual to enter the door only if the database meets the same value. The
system will identify whether the captured image and card belongs to the same user or not and
thereafter, allows the user to enter the room. I had developed this project to be installed at the
doors. I had also installed a GSM Modem that will be applicable to the system to make an
emergency call and alarm the building to the owner of the home or office. I had developed a
project that is applicable to enhancing the security system of the building or home where the
system will be installed.

CE 1.2.2 Objectives developed for the project
I had identified and set the following objectives for the successful delivery of the project
and introducing an option to the world with a much advanced and secured option to the world:
To develop a security system that is much advanced than earlier security systems
To utilize the RFID for presenting the advanced security system
To develop the project within the expected schedule
To manage the whole team towards single objective of project completion
To manage the budget of the project and keep it low as much possible
CE 1.2.3 My area of work
I had led the team towards the accomplishment of the objectives and activities of the
project and tried to accomplish my roles and team members’ roles with responsibility. I was
taking care of the establishment of the components within the established design and I had
connected all the components for the team within the system. I had fixed the RFID tag, and
reader, camera, GSM modem, microcontroller, non-volatile RAM, door locks, and alarm within
the designed model. I had used the “IPC80 passive RFID tag” that can be operated at 125 KHz
frequency in ASK format, and “IP 10 proximity card reader” for the signal transmission. Other
products were selected considering of high quality at lower price. We had used “FEC FC440
programmable logic controller (PLC)”, which was the most important part of the project for the
identification of the individuals and the cars through the RFID tag implemented on them.