logo

Telecommunications Management Network: Features and Functions

   

Added on  2023-06-11

11 Pages2598 Words441 Views
Running head: TELECOMMUNICATIONS MANAGEMENT NETWORK
Telecommunications management network
Name of the Student:
Name of the University:
Author Note

1
TELECOMMUNICATIONS MANAGEMENT NETWORK
Answer to question number 1
The function and the features of the of the architecture of network management
system are:
Real-Time Visibility and Analytics
The feature is very important and the collection and production of the insights to the
real time visibility and usage of the resource of a particular network are very important. For
the visibility the components that are being through of are:
Signal coverage: This allows the users to access the location of the access points on the
network and collect the data of the throughput of the campus or throughout the networking
area.
Device connections: This provides the data to the end users and handle the connections in the
network.
Device locations: This provides the information about the location of the devices and the
should be able to access the API so that the responses from the devices can be recorded in the
networking system.
The Ability to Grow with Needs of the users
The system provides the users with the opportunity to expand immensely with the
network efficiently. The network can reach out to all the peers efficiently and can also
accommodate more systems in the network with the use of the architecture of the network
management system. In case of the remote devices the wireless systems can be used to
connect with the devices.
Compliance and Reporting

2
TELECOMMUNICATIONS MANAGEMENT NETWORK
For various type of organization in the industry in the present time the need to
compliance and reporting is very high and hence this feature is very efficient for the network
systems and hence, then health and the process clogs of the system are to management by this
system.
Answer to question number 2
There are various features of the configuration and function of the network management
system:
The networking management system configuration helps in the streamlining the
processing, maintenance and repairing of the network.
The errors of the system are also reduced as part of the change management system.
The changes made to network can also be rollback using the configurations and the
functions of the networking management system. This helps in the situations where
the network system is setup wrongly.
These features are included in the Standard committee international.
Answer to question number 3
a. For the fault management of the system:
For the management of the faults in the system at first the fault in the system has to be
detected.
For the detection of the faults in the system the polling and the interruption techniques
are to be used.
Polling is implemented in the network so that whenever a device is at fault the
transmission is stopped and the interrupted.
After this the fault management technique is applied for the system and the fault in
the system is rectified with it.

3
TELECOMMUNICATIONS MANAGEMENT NETWORK
b. For a given situation the given enterprise solution:
The main standards of the network management policies are applied during the fault
management.
After the device is re installed the transmission of the data in the network is done.
Answer to question number 4
a. The features of the QoS Agreement are:
Identification of the service consumer and provide in each party actions.
The fraction of time that the service is available
The secret information is to be stored within the system and not to be leaked out of
the scope of the system.
The urgency of the delivery of service for the client is to be maintained and also value
for the interest of the client is also to be maintained.
The informations served to the clients should also be accurate and the critical
situations are to be tacked efficiently.
b. The range and type of the monitoring facility are:
The VoIP speed test is conducted for the bandwidth and jitter test.
The Round trip times are also to be checked.
Answer to question number 5
The organization that have the voicer networks should generally own more than
branch for the transfer of data over the network. It requires wiring to each telephone so that
the employees of the organization are able to gain access to the public service telephones and
network. It requires the lines which are outside to be purchased from the local public
telephone company. In addition to this the system also has some hardware and software
requirements, that helps the organization include the line cards that terminate the local wiring

End of preview

Want to access all the pages? Upload your documents or become a member.

Related Documents
Telecommunication Management System (TMS)
|10
|2341
|73

Network Management Architecture and Zabbix Installation
|18
|1932
|191

OpManager: Network Monitoring and Management Software
|7
|1444
|75

COMPUTING AND INFORMATION SYSTEMS
|16
|3199
|21

Computer Network
|6
|1077
|40

Design and Implementation of Wireless LAN Security Solution Plan
|15
|3912
|84