Internet Working With Tcp Ip Control Analysis

RUNNING HEAD: INTERNETWORKING WITH TCP/IP
0
Internet
working
with
TCP/IP
Report
Student name

INTERNETWORKING WITH TCP/IP 1
Answer: 1
TCP/IP network architecture has used for communication, which is the best network
model for communication. In addition, most of the firms have used this model for
communication (Dye, McDonald, & Rufi, 2007). It was based on the protocols, which have
performed better in communication. Moreover, it has four layers, which are an application,
transport, internet, and network access layer (Dye, McDonald, & Rufi, 2007). Most of the
protocols have used for better communication with each layer as per their functioning (Le, 2017).
The Internet layer has three main functions, which areas:
1. Transmitting packets: Internets layers have responsibly for the packet transmitting to
the data link layer, which is a huge work, as it is tough work in a network. It has used
a connection oriented and connectionless approaches for transmitting the packets
from one source to another. In addition, TCP/IP has involved these layers for many
functions. Address Resolution Protocol and Reverse Address Resolution Protocol
have used for managing packet transmission (Forouzan, 2007).
2. Routing: TCP/IP has selected this layer for the routing as well. In addition, users have
used this layer for routing packets in a network. It has used proper routing protocols
for routing packets in a network, such as RIP, EIGRP, and many others. Internet
Protocol has used for routing (Medhi & Ramasamy, 2017).
3. Error control: it is a necessary process in which different types of errors have
occurred in the network, which has corrected using the network layer. Most of the
errors have occurred because of fragmentation and reassemble. In addition, a
communication channel has created errors in the data, which is not good for the
receiver. Internet Control Message Protocol is used for error control (Mitchell, 2018).
The Internet layer is the third layer of this protocol architecture, which has provided
reliable data transfer with minimum errors. Moreover, this layer has provided various solutions
to basic services (Paquet, 2013). Moreover, Internet layer has used for managing all the packets.
Mostly, packets can be transformed using connection-oriented and connectionless approaches.
Moreover, network can be managed using internet layer, as IPv4 and IPv6 are used for
data packets. It has used for the particular routing and fragmentation. All the functions are
important for a network. Internet layer has created a proper routing table and information for
packets to travel in the network. All the nodes have used routing table for forwarding the packet
in a network.
Furthermore, most of the protocols have used for particular function, such as IP, ICMP,
ARP, RARP, and many more. All the protocols have some set of rules to communicate in a
network. IP is the most important protocol of this layer, as it has managed packet transmission in
a network.

INTERNETWORKING WITH TCP/IP 2
Answer: 2
IPv4 Header Length field
Internet Protocol Version 4 has used different fields to transmit data in a network. Header
length field has used for identification of length of the header, which is necessary to know about
the size of the packet. Moreover, it has used 4-bits to express the length of the packet. It has used
multiple of 5 bits, as the minimum size of IPv4 will be 20 bytes and the maximum will be 60
bytes (Hogg, 2017).
Identification field
IPv4 has used an identification field for the error control in the function of fragmentation
and reassembly of message segments of a packet, which has used for minimizing the errors in the
network. Most of the packets have sent in the network, but in some cases, packets have
fragmented in the datagrams because of the size of the packets (Rao, 2018). Thus, each packet
has divided into various parts, which can be sent in the network. The identification field has used
for segments identification. The receiver can find the same ID of all the segments of a single
paper. 16-bits have used for the identification of a segment of a particular packet (Techdonut,
2018).
Answer: 3
227.12.14.87: This address belongs to class D, which has used for multicasting. It is a
special class, which has used for forwarding a message to multiple clients at the same time. Most
of the organization has used class D addresses for multicasting in their groups (Certiology,
2018). The message has gone to selected users form a big list in a single time. It does not use a
subnet mask for multicasting. It has used for special wireless communication and cable-TV
(Tanenbaum, 2014).
14.23.120.8: This address belongs to class A, which has used for the large-scale network
in a huge organization, such as Google, IBM, Microsoft, and many others. It can manage 16
million users in a single network. Most of the large-scale network has used class an address, as
they have used a large number of hosts in their different departments. The default subnet mask of
this class is 255.0.0.0 (Sunshine, 2013).
Answer: 4
In this case, all the routers have placed between different networks, as shown in the
below figure. All the devices have connected with the router and LAN and WAN.