ICTICT40115 Certificate IV in Information Technology Subject Name Wireless Network

T-1.8.1
Details of Assessment
Term and Year Time allowed N/A
Assessment No 1 of 2 Assessment Weighting 60%
Assessment Type Report Writing
Due Date Week-4 Room George St
Details of Subject
Qualification ICT40115 Certificate IV in Information Technology
Subject Name Wireless Network
Details of Unit(s) of competency
Unit Code (s) and
Names
ICTICT401 Determine and confirm client business requirements
ICTNWK405 Build a small wireless local area network
ICTSAS307 Install, configure and secure a small office or home office network
ICTNWK410 Install hardware to a network
Details of Student
Student Name
College Student ID
Student Declaration: I declare that the work submitted is my
own and has not been copied or plagiarised from any person or
source. I acknowledge that I understand the requirements to
complete the assessment tasks. I am also aware of my right to
appeal. The feedback session schedule and reassessment
procedure were explained to me.
Student’s
Signature: ____________________
Date: _____/_____/_________
Details of Assessor
Assessor’s Name
Assessment Outcome
Assessment
Result Competent Not Yet Competent Marks /60
Feedback to Student
Progressive feedback to students, identifying gaps in competency and comments on positive improvements:
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
____________________________________________________________________
Assessor Declaration: I declare that I have conducted a
fair, valid, reliable and flexible assessment with this
student.
Student attended the feedback session.
Student did not attend the feedback session.
Assessor’s
Signature: ___________________
Date: _____/_____/________
Wireless Network, Assessment Task - I, v_3.0, Last updated on 24/05/2019 Page 1

T-1.8.1
Purpose of the assessment
The purpose of this assessment is to assess the student in the following
outcomes:
Competent
(C)
Not yet
Competent
(NYC)
ICTICT401 Determine and confirm client business requirements
1. Determine context of business need or problem
1.1 Establish the business problem to be investigated, including determining
system boundaries, scope and the development methodology to be used
1.2 Use chosen information gathering method to identify clients of the system
and problems they encounter
1.3 Analyse physical requirements and identify changes required to implement
new systems
1.4 Record client responses
1.5 Submit documentation to client for final approval or sign-off
2. Gather information
2.1 Use chosen information gathering method to identify clients of the system
and problems they encounter
2.2 Record client responses
2.3 Analyse gathered information to identify new system requirements and
establish problem specifications
2.4 Document system requirements and problems
2.5 Analyse physical requirements and identify changes required to implement
new systems
3. Confirm system specifications
3.1 Check documentation to ensure it meets client business needs
3.2 Submit documentation to the client for verification of accuracy and approval
3.3 Make changes to the documentation as necessary and indicated by the
client
3.4 Submit documentation to client for final approval or sign-off
ICTSAS307 Install, configure and secure a small office or home office network
1. Confirm client requirements and identify relevant network equipment
1.1 Identify and clarify client requirements for the small office home office
network
1.2 Identify most suitable network design to meet client requirements
1.3 Develop and document network design
1.4 Identify most suitable network technologies, devices and protocols and
network cables and connectors to meet network design
1.5 Review available network technologies, devices and protocols and
determine the most appropriate to meet client requirements
1.6 Source vendors and service suppliers to obtain specifications, availability
and cost of identified components
1.7 Ensure client sign-off for proposed network design and associated
components
2. Install and configure hardware and software
2.1 Develop installation plans with prioritised tasks and contingency
arrangements for installation of components with minimum disruption to client
2.2 Liaise with appropriate person to obtain approval for plans, including
security clearance and timing
2.3 Confirm and review supplier documentation that network cables and
connectors have been installed according to industry standards, client
requirements and building requirements
Wireless Network, Assessment Task - I, v_3.0, Last updated on 24/05/2019 Page 2

T-1.8.1
ICTNWK410 Install hardware to a network
1. Determine network hardware requirements
1.1 Assess client network hardware and cabling requirements, considering
compatibility with existing application software and operating system
1.2 Analyse requirements against local area network (LAN), wide area network
(WAN), wireless networks, and mobile equipment access design limitations
and organisational guidelines
1.3 Evaluate client requirements according to organisational guidelines,
corporate purchasing procedures, licensing
2. Obtain network hardware
2.1 Contact vendors and obtain technical specifications
2.2 Evaluate or test hardware according to client requirements and
organisational guidelines
2.3 Document recommendations and provide copies to appropriate person
2.4 Determine and document licensing requirements and security issues
2.5 Acquire hardware according to recommendations and organisational
procedures
2.6 Organise cabling infrastructure where required
ICTNWK405 Build a small wireless local area network
1. Confirm client and equipment requirements
1.1 Identify, clarify and organise client requirements according to network
needs and organisational requirements
1.2 Ensure an appropriate person has given the authority for wireless network
access
1.3 Evaluate requirements along with business needs, and translate into
technical requirements
1.4 Identify components to be installed in order to meet the technical
requirements
1.5 Select position for access point, based on user requirements and
environmental conditions
1.6 Arrange for preliminary work to be carried out to meet cabling and power
requirements
Assessment/evidence gathering conditions
Each assessment component is recorded as either Competent (C) or Not Yet Competent (NYC). A student can
only achieve competence when all assessment components listed under “Purpose of the assessment” section
are recorded as competent. Your trainer will give you feedback after the completion of each assessment. A
student who is assessed as NYC (Not Yet Competent) is eligible for re-assessment.
Resources required for this assessment
 Computer with relevant software applications and access to internet
 Weekly eLearning notes relevant to the tasks/questions
Instructions for Students
Please read the following instructions carefully
 This assessment has to be completed In class At home
 The assessment is to be completed according to the instructions given by your assessor.
 Feedback on each task will be provided to enable you to determine how your work could be improved. You
will be provided with feedback on your work within two weeks of the assessment due date. All other
feedback will be provided by the end of the term.
 Should you not answer the questions correctly, you will be given feedback on the results and your gaps in
knowledge. You will be given another opportunity to demonstrate your knowledge and skills to be deemed
competent for this unit of competency.
 If you are not sure about any aspect of this assessment, please ask for clarification from your assessor.
 Please refer to the College re-assessment for more information (Student handbook).
Wireless Network, Assessment Task - I, v_3.0, Last updated on 24/05/2019 Page 3

T-1.8.1
Assessment Task 1- Project Activity Report (60%)
In this assessment task, you are required to gather, determine and confirm client requirement and
review available network technologies, devices and protocols to build WLAN (Wireless Local Area
Network) for small office or home office network by choosing appropriate hardware and software in
accordance to business and technical requirements including installation plan, network design and
security.
Introduction:
Sydney Education Group (SEG) is a growing educational provider. It has been operating since
2010. Its main business is to provide vocational training and education for international students. With
further growth in business, SEG has decided to open new office in Brisbane.
Business Details:
The business is owned and managed by John Carter. He is the CEO of the company. There are
altogether 10 full-time for Brisbane Campus.
Brisbane campus comprises of 2 departments and 10 staff; Marketing and Admissions. Andre Shaw is
office manager and is responsible for operations, budgeting and approval for Brisbane site. Tracy
Johnson and Angela Sharma are head of Marketing and Admissions department respectively. They
both have 3 staff members in their departments. Tracy is responsible for marketing materials,
approving contents in the website for Brisbane and organising course information. Angela looks after
compliance, student’s documents and policy and procedure.
Below is the organisational chart for Brisbane campus.
The budget SEG have for IT infrastructure is $30,000 in order to purchase physical, network hardware
and software. With these hardware and software are you are require to set up IT infrastructure and
network connectivity in Brisbane campus.
Challenges:
SEG has contracted Complete IT Solutions (CIS) (Managed Services) to complete this project. You
are working as a Network Administrator in CIS. Andre has requested CIS to investigate and prepare a
recommendation report that satisfies all the Hardware, Software, and Infrastructure requirements for
SEG.
Wireless Network, Assessment Task - I, v_3.0, Last updated on 24/05/2019 Page 4
Andre Shaw
Office Manager
Tracy Johnson
Marketing
officers X 3
Angela
Sharma
Admissions
Officers X 3
Receptionist